SWFL Racing

Best Sounding GTO on FMR?

BlackMagicGTO — Sat, 19 May 2012 00:28:21 GMT

http://www.youtube.com/watch?v=czKhi...e_gdata_player

Driver Refuses to Let Cop Search Vehicle, What Happens Next (is Worth Sharing!!)

h0mesk3wLLed — Fri, 18 May 2012 19:57:07 GMT

Hahhahahahahha rofl:rofl:rofl:

http://www.youtube.com/watch?v=ixrbmf3ZuUs&t=4m0s

Mustang S197 Questions About a Powerglide

B00sted_3vDevil — Thu, 17 May 2012 13:28:27 GMT

I have a chance to purchases a ultra glide for my 2005 mustang GT for $2,200 comes complete with tranny, modular adapter, 3500 stall, tci performance automatic flex plate, shifter

Only thing i will need is a driveshaft and trans mount.

So my questions is what else will i need to make the thing work? Am i going to have trouble with the speedo and rpm on the gauge cluster

I'm having the motor being built now so on e85 hoping to be 720-750rwhp
just want a fun fast weekend car and a semi quick track car

You Cannot See Me :)

StrokedNotch — Wed, 16 May 2012 19:00:31 GMT

Got bored today decided to black out the Fusion. 35% Premium Polarized on the windsheild. With a 5% strip about 3" below as1.

PRL Update

ISMELLRICE — Wed, 16 May 2012 17:51:39 GMT

Justin you need to hook up both my skyrocket and the s2 on sprin
i think I need a new prl

Ferrari 599 GTO Fatal Crash with Taxi

h0mesk3wLLed — Tue, 15 May 2012 20:22:46 GMT

SINGAPORE - An accident involving a Ferrari, a taxi and a motorcycle has left three dead and two others injured.

The crash occurred in the wee hours of Saturday at the junction of Rochor Road and Victoria Street.

Witnesses say that the Ferrari crashed into a taxi when it ran a red light, causing the taxi to hit a passing motorcycle.

The impact was so hard that the taxi's engine was found 30m away from the vehicle, reported Shin Min Daily News.

The accident location is said to be a black spot with six accidents occurring over the past 12 days.

Police and SCDF received calls about the accident at about 4.15am.

Drivers of both vehicle were trapped and had to be extricated by SCDF personnel.

The Ferrari driver of the car was pronounced dead at the scene by the paramedics. Shin Min Daily News reported that the driver was 31-year-old Chinese businessman Ma Chi.

The female passenger in the Ferrari, in her 20s sustained head injuries.

The motorcyclist, in his 20s, sustained spinal injuries.

All three of them were sent to Tan Tock Seng Hospital.

The cab driver in his 40s sustained head injuries and died at the hospital a few days later.

The taxi's passenger, a woman in her 20s, was found unconscious and died at the Singapore General Hospital, reported The Straits Times.

pictures of wreck can be found at: http://motoring.asiaone.com/Motoring...15-346047.html

This video was recorded by another Taxi driver with an on-board camera.

Finally, the Video of Killrvette Vs 2Jz Matt

h0mesk3wLLed — Tue, 15 May 2012 19:23:15 GMT

Brakes?

FamousGTO — Tue, 15 May 2012 13:21:43 GMT

im looking to upgrade my brake system. what are the differences or advantages of slotted/drilled/slotted and drilled? which do i realistically need as just a nice daily driver occasional racer brake rotor.

MattyB_2jz Vs Kllrvet VIDEO!

mattyB_2jz — Tue, 15 May 2012 02:53:43 GMT

The rematch doesnt happen unless the video comes out.. Your call Jeffie.
Figured this would be as good a place as any. Feel free big guy ;)

Nothing personal Tony..

My Ex Bosses Truck

project_prelude — Mon, 14 May 2012 20:17:04 GMT

The vid was taken from my phone so sorry for the quality.. his best time is a 4.90 I think

Nitrous Question

project_prelude — Mon, 14 May 2012 18:58:33 GMT

Ok so I have done some searching around and can't find a straight answer.. I know that spraying over 100 shot out of a single fogger is not so safe, but I was told that a direct port kit does not "hit" as hard but of course it is a lot safer. The reason I'm asking is that I am planning to go from the 125 shot on the fogger to the same on the direct port.. so do I need to up the shot when going to the direct port to yield the same power or what? I know that direct port "should be" more efficient but....

Offering My Services

mattyB_2jz — Mon, 14 May 2012 15:22:21 GMT

My wife and I have decided to divorce, so money is going to be tight for some time. Im trying my hardest not to sell my car, so the time has come to whore myself out.

Theres plenty of things I can do that maybe you dont have the time or patience to do.
Primarily, heat wrapping. Ive become pretty good at it and its not exactly easy to do. Its definately time consuming. Im thinking prices would be about $12.50-$17.50 per primary plus supplies. Pricing will vary depending on difficulty level. Whatever you got, headers, downpipes, intercooler piping, etc... Geoff, Zach5.0, Justin@GCMW are just a few that could validate my abilities.

Other things Im experienced with is suspension swaps (coilovers, springs, struts, etc).
Maybe you want your calipers painted nicely. Ive been doing these kinda projects for years. Whatever it is, ask me.

Dont forget, Im trying to make money here. But my pricing will be fair for sure. I take my time with my work, so dont expect things done same day and shit. I did all my work on my car and have done so for many cars before.

Matt (239)288-1105

Jdm Sohc Zc

eg8project — Mon, 14 May 2012 05:55:05 GMT

hey guys i need a little help. i know a little about honda motors enough to get me by but just recently i bought a 94 eg8 from a kid who said that it was chipped and tuned but he couldnt tell me what or where it was tuned on. so my question is how do i go about finding what its tuned on or if it even is tuned. i do know it has a two step but im not sure where the motor itself come out of. ive been doing some research and im pretty sure it came out of 88-91 crx si. any help would be awesome thanks guys:help

Southern Comfort

xr4ti beast — Mon, 14 May 2012 02:47:51 GMT

http://www.facebook.com/SouthernComf...pingMotosports

Crazy Ass Video

demetri01ws6 — Sun, 13 May 2012 01:41:28 GMT

http://www.youtube.com/watch?v=jtcTcGFmjro

What to Do with the I30t?

fmGF — Sat, 12 May 2012 17:37:25 GMT

I'm getting really tired of my car and it's really old but i can't exactly afford a new car at the moment...i know i'm not gonna' go fast but i want to spice up my life with some ish. any ideas?
i was thinking of going semi-lower, fixing paint, tinting the windows, baby system and the more 'simply clean' look but i don't want a mexi-box.

Carroll Shelby DDEEEAADDDDDDD!

Sloww — Fri, 11 May 2012 19:52:13 GMT

r.i.p
http://content.usatoday.com/communit...f-cobra-dies/1

Painters and Body Work Advice Needed

Brandonm239 — Fri, 11 May 2012 19:18:52 GMT

gf had a small fender bender a little while back and her cf hood get scratched and in one spot cracked. is there anyway to reapair this? i was thinking maybe to get it sanded down and recleared. is there anyway to get it close to back to normal instead of buying another hood :help:help

Valve lifter & spring compressor

B00sted_3vDevil — Thu, 10 May 2012 21:26:42 GMT

Does anyone have 1 i can barrow for a week???? my springs and retainer just came in and would like to finish the job correctly not half ass

please text me 239-872-6211

Okay, This Looks Like a Good Idea...nos on 370

ScGRaceR — Thu, 10 May 2012 21:01:49 GMT

http://www.youtube.com/watch?v=a0X0d...&feature=share

but read the description

Check Out These Airplane Landings.

ArmyBoyATC — Tue, 08 May 2012 19:56:53 GMT

http://www.youtube.com/watch?v=Aokg32arYwU

K20 Insight NAWZ

DSM JOEY — Tue, 08 May 2012 01:36:17 GMT

http://www.youtube.com/watch?v=wudSB...-L1LVPxnvyonJg

2:53

grabbin 3rd gear with nawz.

idk saw this video and laughed thought it was badass.

Need to Borrow Tires

tommy — Mon, 07 May 2012 21:17:04 GMT

Need a set of non competition tires to throw on my car . 275/40/18 to 315/35/18 . Just a set of dead ones will work. Dropped my car for warranty work and they pointed out that my claim could be denied cause of competition tires on back so I'm kinda in a hurry. Anything?

Timing Chain Tensioner/ Timing Chain Kit Replacement

Nate — Mon, 07 May 2012 21:01:54 GMT

I've been getting quotes to have this done since the car needs the work to be done, I don't have the time or patience to do it myself and would like to be able to have it done the same day as it's dropped off somewhere.

Anyone know of a good shop locally that can do it and not charge an arm and a leg? I've been getting quoted around $200 to have it done and that's with me buying the parts.

For reference it's an 02 Cavalier 2.2l

Fucking Badass BOSS.

Krozi — Mon, 07 May 2012 18:58:16 GMT

This guy's a boss.

http://www.streetfire.net/video/vale...te_2383843.htm

Valet Caught Joyriding in Corvette!

Holy Sh*t!!!

Buds4me578 — Mon, 07 May 2012 15:14:28 GMT

highway backflip

Scary Highway Accident!
http://www.streetfire.net/video/scar...nt_2384192.htm

New Car Inside.

StrokedNotch — Mon, 07 May 2012 05:09:48 GMT

Picked up a new car Saturday. Love it so far.

2012 Fusion SE. 2.5, Cat-Back exhaust, Lowered, K&N, Automatic. Love it. Comfortable, great on gas, and still has a clean look and style.

Need 2001 Rm125 Exhaust

SLO4SHO — Mon, 07 May 2012 03:49:42 GMT

I need a stock exhaust for a 2001 Suzuki Rm125

UGR Doin Work Yet Again

1FAST3V — Sat, 05 May 2012 14:14:27 GMT

http://www.youtube.com/watch?v=uCqbg8akOmA&

LS Engine Cost?

soupcan — Fri, 04 May 2012 13:16:02 GMT

Thinking about an LS swap for one of my cars, no more than 400rwhp N/A is the goal. What are used LS engine going for? Best one to buy,etc,etc?
This will be a DD, so nothing crazy needed. Fits nicely in a 928.

It RUNS!!

ilove7s — Thu, 03 May 2012 02:58:29 GMT

http://www.youtube.com/embed/2hZ9Gog90XE

Brand Loyalty?

titter — Wed, 02 May 2012 21:50:02 GMT

I has none.

I Need a Mechanic to Swap Full Exhaust

Sick03L — Wed, 02 May 2012 21:14:41 GMT

I was asked to swap out my stock manifolds, y pipe, etc for a car with long tubes / full exhaust. I need someone to give me a price and a time frame that this can be done in ASAP.
The other car is being traded in and has to be put back to stock. The go fast goodies on going on my car. Both cars are 2001-2002 LS1 Fbodys.

Need Truck Buying Advice

xr4ti beast — Wed, 02 May 2012 00:25:09 GMT

Just got offered a very decent full time job installing tile. They are going to give me $5 more an hour if I have my own truck. So guess what, I'm truck shopping. Before anyone asks, no, I'm not buying your truck. I'm buying it from a dealer to build my credit. I think I've narrowed it down to 2, just wanted your guys input on each.
2011 Silverado 1500 extended cab, low miles, 8/4cyl fuel management system, metallic grey, cloth interior, 4wd.
Or
2007 GMC 3500 dually, white, 98000 miles, cloth int, 4wd quad cab. 6.6l

Both are the same price. What do you guys think?

Jdm with V8

sidewinder1.8t — Tue, 01 May 2012 00:43:59 GMT

http://www.youtube.com/watch?v=uMdUo...eature=related

F-22 Demo.

ArmyBoyATC — Mon, 30 Apr 2012 14:55:24 GMT

Wish I could see this one in action. Can someone help me imbed it? I cant get it to work.

http://www.youtube.com/watch?v=_nj7x...ature=youtu.be

BMW M5 F10 Vs Corvette Z06

h0mesk3wLLed — Mon, 30 Apr 2012 07:42:26 GMT

Sucks to be this Z06. Stock M5 also. Tuned Z06.

Matt 2jz Lexus, Jesse Turbo Mustang, and Ben Evo Drifting!

h0mesk3wLLed — Sun, 29 Apr 2012 22:30:14 GMT

.

AS ALWAYS, WATCH IN HD!

Cinco De Mayo

Footloose301 — Sun, 29 Apr 2012 17:00:27 GMT

Anyone doing some Auto-X this day? I was thinking about trying it out.

2011 Mustang Gt GCMW Dyno Video

Slamdcoop0428 — Sun, 29 Apr 2012 12:02:15 GMT

Just thought I'd put the video up and a dyno graph pic.

http://i196.photobucket.com/albums/a...p/377a964f.mp4

Fab Work

sidewinder1.8t — Sat, 28 Apr 2012 19:46:13 GMT

starting to finish up this car for a customer of mine here are some pics of some intercooler piping i started doing finished the hot side tomorrow ill finish the cold side more pics to come

3valve Pistons and Rods

B00sted_3vDevil — Sat, 28 Apr 2012 19:18:42 GMT

what do u guys think about this price?

4.6 Modular Ford piston and rod kit with DSS GSX Forged pistons with X groove skirts and CNC fly cut valve reliefs and 4340 H beam rods. with ARP 2000 rod bolts Also included are Ductile Iron, Moly rings and tri-metal rod and main bearings.

$1,399

http://www.dssracing.com/product_p/pnr46x.htm

Some Really Bad Luck!!

95w_bTEG — Sat, 28 Apr 2012 14:50:29 GMT

How the fuck does this happen?!?!?!

:eyecrazy:eyecrazy:eyecrazy

*Warning* Little "gorish".

A Bird in a Bird in a Bird in a Bird in a Brd in a Pig

J Burna — Sat, 28 Apr 2012 08:24:33 GMT

This ones for you Anthony. "Because Bacon"

http://www.youtube.com/watch?v=7Xc5wIpUenQ&feature=plcp

http://www.youtube.com/watch?v=m9FRSghXhDM&feature=plcp

These guys scream coronary; but I love their style.All their vids are crazy!

Trying to Diagnose a Rattling Sound

demetri01ws6 — Fri, 27 Apr 2012 23:49:55 GMT

So I've had these rattling/clicking noises for past 7-8 months or so. But driving it tonight, I really noticed it getting louder/more rattles. It happens when it's staying in the low RPM area of 1500-2000rpm. It feels like it could be something transmission wise, or cv joints, but I have a feeling it's the transmission, or maybe motor mounts, but I'd expect mounts to be more of a clunking.

In this clip, you can hear it at 0:57 and 0:59, I was blipping the throttle while moving. I couldn't get it to make the sound when the car was warming up however, as soon as it fully warmed, and the CVT dropped the RPMS, I could hear it instantly. You can hear it a bit at the 1:15 range and up too.

http://soundcloud.com/dmallous/sound...iday-evening-1

2 Bad Ass Apachies Bringin The Pain..

ArmyBoyATC — Fri, 27 Apr 2012 21:41:38 GMT

I love these things. So glad they were on our side over there. You do not want to be on the recieving end of one of these.

NSFW if you work with liberals.

Cant figure out how to imbed it. Someone help me out.

http://patdollard.com/2012/04/thursd...medium=twitter

Merica

Bamsterman — Fri, 27 Apr 2012 12:08:43 GMT

Since there's a lot of Camaro/Firebird/Trans Am owners here, thought you might like this.

http://dothan.craigslist.org/cto/2960479856.html

1000 Racers 1 Arrest

Phillie419 — Fri, 27 Apr 2012 00:26:56 GMT

http://www.nbcmiami.com/news/Massive...032565.html?dr

Thought this was somewhat interesting.

Ford Stepped It Up

Only_In_A_Domestic — Thu, 26 Apr 2012 21:19:40 GMT

looks like the zr1 will have more competition

http://www.autoblog.com/2012/04/26/2...ntent=FaceBook

Dudes Got Amazing Talent

Anthony — Thu, 26 Apr 2012 18:54:43 GMT

Alignment

pdexta — Thu, 26 Apr 2012 15:11:34 GMT

Any body know a good place to get an alignment? I seem to remember someone that worked at a shop in Cape that could do them for a reasonable price.

Get Together/group Ride Sat Evening/night

JP — Wed, 25 Apr 2012 13:09:47 GMT

We're setting up a cook-out/ride/bon-fire Sat, probably start around 4-5ish and go till whenever. Will be riding from my house(NE Lehigh, Joel/GB area), probably around the back to the 82/bama area & back, then lighting off a nice bon-fire.

I will have the grill lit but it's BYOB/food. Last time we did this we had 15+ quads and 20+ people, all had a great time.

- Jp

Help Haunted Car

96ekhatch — Wed, 25 Apr 2012 02:09:05 GMT

OK been using the girls saturn for a dd to work. One day car dont start not dead battery just nothing. Probably tried starting it 20 times. Check everything and like well crap must be starter. Just to be sure jacked car up put meter on starter trigger wire to see if theres power when you turn the key (to see if its starter or a switch or relay ) and what woudld you know when I asked gf to turn key so i can check for power she starts right up :shift.

Well its done this 3 times know. And not like a day or 2 in between no cranks last time it was like a month later. Wont crank for for days then Ill have time to check it out and bitch with then just start when I dont want it to.

What you guys think should I just assume the solenoid on the starter is just going out. Just really aint got money to be swapping parts and end up stranded.

BMP on May 3rd (Thursday) ??

Geoff — Tue, 24 Apr 2012 14:11:45 GMT

Thinking about making a trip up there on the 3rd to get a few passes in, anyone else interested in making a trip up there as well?

Some Saturday Night Action

mattyB_2jz — Mon, 23 Apr 2012 11:46:57 GMT

Borrowed from FB..

Jesse vs Massie, 20 roll I believe..

Me vs Geoff, 2 digs and a 20 roll.. Testing launch control. The 2 digs happened in reverse order though, JS.

http://www.youtube.com/watch?v=Vb_iH...ature=youtu.be

Rear Axle Bolt Help

xr4ti beast — Mon, 23 Apr 2012 06:45:46 GMT

my rear axle bolt has a 5/16 allen on one side, and a 15/16 hex nut on the other. the bolt is frozen and i stripped the allen side trying to get it off. ive tried heating it, beco-lube, penetrating oil, nothing seems to be working. im ording a new axle bolt tomorrow, but i still have to get the old one off. i havent tried yet, but i would think cutting with a hacksaw, or sawzaw with a metal blade would be out of the question seeing as how its hardened steel. and cutting the hex nut off wouldnt be the best either because its a grade 8 nut. any suggestions?

Anyone Wanna Fix a ATV

B00sted_3vDevil — Sun, 22 Apr 2012 22:28:15 GMT

kawasaki teryx wont engage 4 wheel drive and just don't have the time or knowledge or how these work. I'm going to order a owners manual. But i guess its a issue with these

Let me know i can drop it off or u can come over to my place. Will pay for services either hourly or just a flat charge. Please and thank u

Some Video I Took Yesterday in Miami, at the Florida Bimmer Rally for the Cure 2012

h0mesk3wLLed — Sun, 22 Apr 2012 15:16:28 GMT

Just a video I threw together of yesterday. It was a Rally for cancer kids held by Florida bimmer, at Hard Rock casino.

Fun time.

Defective Tire? Kumho XS

pdexta — Sun, 22 Apr 2012 14:41:59 GMT

I noticed one of my tires looks like it has a cut going across the tire. Certainly doesn't look like something I could have run over. I'm assuming it has to be something that resulted from molding the tire. Anyone seen this before? Is this something that should be replaced? Would it be warrantied? The tire is a few months old, I can't imagine it having much over 1000 miles on it.

Looking for Motorcycle Shop.

stevieg — Sat, 21 Apr 2012 23:43:38 GMT

my friend is looking for a shop to take his 96 gsxr 750. its been setting for 6 months and won't start.